|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
2SB905 TOSHIBA Transistor Silicon PNP Epitaxial Type (PCT process) 2SB905 Power Amplifier Applications * Complementary to SD1220 Unit: mm Absolute Maximum Ratings (Ta = 25C) Characteristics Collector-base voltage Collector-emitter voltage Emitter-base voltage Collector current Base current Collector power dissipation Junction temperature Storage temperature range Ta = 25C Tc = 25C Symbol VCBO VCEO VEBO IC IB PC Tj Tstg Rating -150 -150 -6 -1.5 -1.0 1.0 10 150 -55 to 150 Unit V V V A A W C C Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook ("Handling Precautions"/Derating Concept and Methods) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). JEDEC JEITA TOSHIBA 2-7B1A Weight: 0.36 g (typ.) JEDEC JEITA TOSHIBA 2-7J1A Weight: 0.36 g (typ.) 1 2006-11-21 2SB905 Electrical Characteristics (Ta = 25C) Characteristics Collector cut-off current Emitter cut-off current Collector-emitter breakdown voltage DC current gain Collector-emitter saturation voltage Base-emitter voltage Transition frequency Collector output capacitance Symbol ICBO IEBO V (BR) CEO hFE (Note) VCE (sat) VBE fT Cob Test Condition VCB = -150 V, IE = 0 VEB = -6 V, IC = 0 IC = -10 mA, IB = 0 VCE = -5 V, IC = -200 mA IC = -500 mA, IB = -50 mA VCE = -5 V, IC = -5 mA VCE = -5 V, IC = -200 mA VCB = -10 V, IE = 0, f = 1 MHz Min -150 60 -0.5 15 Typ. 50 Max -1.0 -1.0 320 -1.5 -0.8 35 V V MHz pF Unit A A V Note: hFE classification R: 60 to 120, O: 100 to 200, Y: 160 to 320 Marking B905 Part No. (or abbreviation code) Lot No. Characteristics indicator A line indicates lead (Pb)-free package or lead (Pb)-free finish. 2 2006-11-21 2SB905 IC - VCE -1.6 -200 -100 200 -60 -30 -20 Common emitter Tc = 25C 100 hFE - IC -1.2 -15 DC current gain hFE (A) -10 50 30 VCE = -2 V Collector current IC -10 -0.8 -7 -4 IB = -2 mA -5 Common emitter 10 Tc = 25C -0.4 5 0 0 0 -4 -8 -12 -16 -20 -30 -100 -300 -1000 Collector current IC (mA) Collector-emitter voltage VCE (V) hFE - IC 200 Tc = 100C 100 25 0 50 30 -3 -5 Common emitter Tc = 25C VCE (sat) - IC Collector-emitter saturation voltage VCE (sat) (V) DC current gain hFE -1 -0.5 -0.3 Common emitter 10 VCE = -10 V -5 V 5 -30 -100 -300 -1000 -0.1 -0.05 -0.03 -10 IC/IB = 10 5 Collector current IC (mA) -30 -100 -300 -1000 Collector current IC (mA) VCE (sat) - IC -5 -1.6 Common emitter IC/IB = 10 IC - VBE Common emitter VCE = -5 V Collector-emitter saturation voltage VCE (sat) (V) -3 (A) -1 -0.5 -0.3 Tc = 100C 25 0 -1.2 Collector current IC -0.8 -0.4 Tc = 100C 25 0 -0.1 -0.05 -10 -30 -100 -300 -1000 0 0 -0.4 -0.8 -1.2 -1.6 Collector current IC (mA) Base-emitter voltage VBE (V) 3 2006-11-21 2SB905 fT - IC 300 100 Cob - VCB Collector output capacitance Cob (pF) Common emitter Tc = 25C Common emitter 50 30 f = 1 MHz Tc = 25C Transition frequency fT (MHz) 100 VCE = -5 V 50 -2 30 10 5 3 -1 -3 -10 -30 -100 10 -3 -10 -30 -100 -300 Collector current IC (mA) Collector-base voltage VBE (V) Safe Operating Area -5 -3 12 PC - Ta PC (W) (1) (1) Tc = Ta infinite heat sink (2) Ceramic substrate 50 x 50 x 0.8 mm (3) No heat sink IC max (pulsed)* IC max (continuous) 1 ms* 10 ms* 100 ms* 10 (A) -1 DC operation Tc = 25C Collector power dissipation 8 Collector current IC -0.5 -0.3 6 4 (2) *: Single nonrepetitive pulse -0.1 Tc = 25C Curves must be derated linearly with increase in temperature. -3 -10 -30 VCEO max -100 -300 2 (3) -0.05 -0.03 0 0 25 50 75 100 125 150 175 Ambient temperature Ta (C) Collector-emitter voltage VCE (V) 4 2006-11-21 2SB905 RESTRICTIONS ON PRODUCT USE * The information contained herein is subject to change without notice. 20070701-EN * TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the "Handling Guide for Semiconductor Devices," or "TOSHIBA Semiconductor Reliability Handbook" etc. * The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury ("Unintended Usage"). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in his document shall be made at the customer's own risk. * The products described in this document shall not be used or embedded to any downstream products of which manufacture, use and/or sale are prohibited under any applicable laws and regulations. * The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any patents or other rights of TOSHIBA or the third parties. * Please contact your sales representative for product-by-product details in this document regarding RoHS compatibility. Please use these products in this document in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses occurring as a result of noncompliance with applicable laws and regulations. 5 2006-11-21 |
Price & Availability of 2SB90507 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |